Continuing Education Courses

Keep informed about the industry by registering for courses through NEIEP. Browse through the course descriptions in our Course Catalog to learn more about the topics studied by registered apprentices in the Elevator Industry.

Current members need to log in to attend classes.

CE001 DC Generators and Motors

Describes passenger elevator doors and entrance installations, elevator cab assembly and door operators, freight elevator doors and gates, and freight door operators.

Instruction Hours:8
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Installation 500

CE002 Solid State Theory and Application

Details the various concepts and components for solid-state theory and application: PC boards, diodes, transistors, thyristors, power supplies, and operational amplifiers.

Instruction Hours:64
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Solid State 600

CE003 Solid State Theory and Application II

Continues exploring solid-state theory and application and rounds out the coverage by exploring applicable number systems, gates, memory elements, and specialty devices.

Instruction Hours:28
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Solid State 600

CE004 Microprocessor Based Control

Introduces processor-based systems, microprocessors, peripheral circuits, and memory, as well as input/output and maintenance and servicing.

Instruction Hours:24
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Solid State 600
Power & Logic 700

CE005 Solid State Motor Control

Examines the theory and devices used in the design of a typical solid-state motor control, along with operation and troubleshooting.

Instruction Hours:20
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Solid State 600
Power & Logic 700

CE006 Hydraulic Controller Theory and Troubleshooting

Reviews troubleshooting methods using the Virtual Hydraulic Controller Lab (VHCL). Includes numerous fault scenarios, each representing a separate trouble call that requires demonstration of a logical procedure for finding the fault.

Instruction Hours:16
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Solid State 600
Power & Logic 700

CE007 Reroping Series

Details the major procedures involved in reroping work. Covers inspecting ropes for defects, which includes wire rope inspection criteria, an explanation of rouging, a look at rope diameter, the process of ordering replacement ropes, and setting up the job with the customer. Addresses reroping configurations and rope replacement, including preparation for reroping, work site setup, tools and rigging equipment, car and counterweight setup and reroping procedures for 1:1 and 2:1 rope routing. Discusses socketing and shackling, which involves rope re-socketing, Babbitting and wedge clamps, rope length adjustments, rope tension adjustments, rope ID tags and the effects on load weighing.

Instruction Hours:6
Prerequisites:
Hoistway Structures 200

CE008 Customer Relations Series

Discusses how Elevator Constructors present themselves to customers and the role of body language and personal habits in building customers’ perceptions of Mechanics. Explores the art of communication with our customers: the communication process, listening skills, speaking skills, and questioning skills. Details strategies for interacting with customers.

Instruction Hours:8

CE009 Escalators Series

Details escalator components and installation procedures, moving walk components and installation procedures, as well as maintenance and service on these installations.

Instruction Hours:8
Prerequisites:
Advanced Topics in Elevators 800

CE010 Door Operator Series

Describes passenger elevator doors and entrance installations, elevator cab assembly and door operators, freight elevator doors and gates, and freight door operators.

Instruction Hours:8
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Installation 500

CE011 Meters Series

Explores the VOM multimeter, including measuring voltage, current, and resistance. Stresses meter safety, care of the multimeter, and protecting equipment. Addresses the line splitter, the precision shunt, and current conversions. Covers capacitors and inductors and applications of current and resistance measurements. Includes experiments on the mini Electra Lab.

Instruction Hours:8
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400

CE012 Maintenance

CE012.1 Machine Room Maintenance
Highlights the more common areas of maintenance in traction elevator machine rooms and their accepted procedures, including customer relations skills, record keeping, and inventory management. Makes clear for apprentices to follow company procedures or policies where they exist.
Instruction Hours: 8

CE012.2 Hoistway Maintenance
Focuses on items common to most installations and their nearly universal periodic hoistway maintenance operations. Concludes with required testing procedures. Details code-required items for testing, along with traditionally accepted methods of performing these tests.
Instruction Hours: 8

CE012.3 Hydraulic Elevator Maintenance
Outlines common maintenance items and problem areas associated with hydraulic equipment, including motor starting and protection systems, noise reduction, belt maintenance, and valve and solenoid care. Examines the area of the pit and discusses safety issues of the jack, pit shutoff valve and hydraulic piping.
Instruction Hours: 8

Instruction Hours:24
Prerequisites:
Installation 500
Advanced Topics in Elevators 800

CE013 Rack & Pinion

Explores the components of rack & pinion elevators as well as permanent and temporary installations, maintenance, repairs, and safety concerns associated with this specialty lift.

Instruction Hours:8
Prerequisites:
Advanced Topics in Elevators 800

CE014 Traveling Cable Series

Discusses the use of traveling cables within the elevator industry. Details the fabrication, installation, and construction of various types and sizes of traveling cable. Explains proper handling and preparation of the cable for installation. Explores methods used to hang and protect traveling cable from undue wear and abrasion on all installations, from low- to high-rise applications. Presents methods of installing piping and wiring associated with the elevator car.

Instruction Hours:8
Prerequisites:
Installation 500

CE015 LULA Series

Details all aspects of residential and limited use/limited access (LULA) lifts including a comparison of the different types and their installations, machine rooms and spaces, clearances, doors and entrances, types of drive power, major components and more. Covers stairway lifts and discusses stairway types and standard sequence of installation as well as system components and equipment options.

Instruction Hours:16
Prerequisites:
Advanced Topics in Elevators 800

CE016 Asbestos

Provides a brief history of asbestos use in the United States, when asbestos finally became regulated and the progression of more stringent exposure limits up to and including the ban on the use of AsbestosContaining Material (ACM). Explains how Elevator Constructors can protect themselves and their families from exposure. Presents current OSHA and EPA regulations and discusses workers’ rights to access the results of required testing for ACM use and abatement.

Instruction Hours:4

CE017 Safety Testing for Code Compliance

Details safe inspection procedures for traction and hydraulic systems. Designed for those with previous instruction in NEIEP material and experience in the field.

CE017.1 Testing Traction Elevators
Identifies the steps of category one and category five safety testing procedures for traction elevators. Explains the purpose of the safety testing process to prepare for annual and five-year inspections. Describes how to conduct annual and five-year safety tests for traction elevators.
Instruction Hours: 8

CE017.2 Safety Testing for Hydraulic Elevators
Outlines the testing procedures required for hydraulic elevators and lists the tools needed for testing. Discusses system pressures and identifies the procedures for categories one, three, and five testing of hydros. Includes examples of test forms.
Instruction Hours: 8

Instruction Hours:16
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400
Advanced Topics in Elevators 800

CE018 Scaffolding Competent Person Course

Provides competent person training for framed scaffolds including erecting and dismantling framed scaffolding. Details procedures for observing, correcting, and preventing hazards associated with framed and suspended scaffolding. Elevator constructors who successfully complete this course receive a Competent Person certification and a Hazardous Awareness certification.

Instruction Hours:12

CE019 Welder Training

Identifies welding terms and definitions. Demonstrates safe work habits in the welding environment. Describes the parts and types of welds and weld joints. Explains how to interpret basic welding symbol information. Details the process of SMAW machine set-up, joint preparation, root pass, cover pass, and cap and backing bar removal. Prepares students to identify the necessary steps and acquire the skills to pass the 3G/4G welding certification in accordance with AWS D1.1 Structural Steel Code. Recognizes AWS SMAW certification procedure specifications. Culminates in 3G and 4G welding certification for successful challengers.

NEIEP provides welder training to all interested Elevator Constructors through a systematic program of deploying Mobile Welder Training Units. All elevator constructors wishing to participate in this program will be required to fill out an application available on the Online Training and Licensing page at neiep.org under Additional Training. Part I of the application process includes completion of the Online SMAW course.

Instruction Hours:40
Prerequisites:
Online SMAW Course

CE020 Online Course in Signaling & Rigging

Covers signaling and rigging basics. CE020 is a prerequisite for CE021: Signal Person & Rigger Level II Prep Course – a classroom-based course with a hands-on rigging component, which will prepare you to challenge the Certified Signal Person & Rigger Level II Exam content. Please contact your Local to find out when and where CE021 will be held in your area. While you may use your CE020 Certificate of Completion to register for the Certified Signal Person & Rigger Levels I & II (CSPR-1/2) Exam at www.elevatorcspr.org. NEIEP strongly recommends completing BOTH CE020 (online) and CE021 (classroom) courses to ensure you are thoroughly prepared to challenge this rigorous exam.

Instruction Hours:8

CE021 Classroom-Based Course in Rigging

Developed in collaboration with the Crosby Group, includes a hands-on rigging component as preparation for challenging the Certified Signal Person & Rigger Levels I & II (CSPR-1/2) exam content. Visit www.elevatorcspr.org to learn more about earning a Certified Signal Person & Rigger Levels I & II card through this ANSI-accredited Personnel Certification program.

Instruction Hours:20
Prerequisites:
CE020 Online Course in Signaling & Rigging

CE022 Financial Tools for the Trades

Provides an easy-to-understand overview of topics that are especially important in this economy, including: creating and sticking to a budget; reading and understanding credit reports; managing debt and fixing your credit; setting up an emergency fund in case you get laid off; and planning for long-term goals like buying a house, saving for your kids’ college funds or your own retirement.

Instruction Hours:8

CE023 Harassment and Discrimination in the Workplace

Introduces the Title VII Civil Rights Act and explains what constitutes sexual harassment and the speech that harassment law restricts. Explores barriers to resolutions and strategies to exhibit respect in the workplace. Discusses what constitutes discrimination. Explores strategies for making the most of diversity in the workplace and beyond.

Instruction Hours:2

CE024/S Advanced Hydraulic Valve Operation—Adjustment and Troubleshooting

Covers the design, functioning, operation, and adjustment of various types of hydraulic valves, together with methods of performing required testing. Stresses safe work practices throughout. Comprised of a manual with unit examination and three lab books for hands-on learning. All enrollees will explore the first two lab exercises. The third lab guides enrollees on the use of the Hydraulic Valve Simulator available in some locations.

Instruction Hours with Simulator: 16

Available in Spanish.

Instruction Hours:12
Prerequisites:
Advanced Topics in Elevators 800 (Available in Spanish)

CE025 Mechanic Review Eligibility Course

Offers students a thorough review of all eight semesters of NEIEP apprenticeship to prepare for the Mechanic Examination. Maintains exam eligibility for students through their participation in active hours of classroom training.

Instruction Hours:72
Prerequisites:
All apprenticeship semesters 100-800

CE026 Arc Flash Safety in the Workplace

An arc flash is a sudden, unexpected discharge of electricity that travels through the air between conductors, or from a conductor to ground. This short circuit releases enormous amounts of energy as light and heat. This course gives Elevator Constructors the knowledge and awareness they need to avoid the calamities that can and do result every day from a lack of training.

Instruction Hours:8

CE027 Virtual Escalator

This interactive course allows students to explore the complex inner workings of an escalator through a 3D computer model. Highlights structure and functions of a typical escalator installation. Details the components and assemblies of the escalator and how they work within the escalator framework. Introduces students to the names, locations, and functions of the major mechanical and electrical escalator components. Uses generic names when discussing components, since this nomenclature can be different from one manufacturer to another. Provides a solid foundation in escalator system functionality no matter the company on the nameplate.

Instruction Hours:24

CE030 CPR/First Aid/AED

As part of our continuing emphasis on safety in the workplace, NEIEP offers a certification that includes first aid, adult CPR, child CPR, and the use of Automated External Defibrillators (AEDs). Offered in conjunction with the American Heart Association. All course instructors are AHA Heartsaver® trained and certified.
Classes are open to all active members, including probationary apprentices. Instructors can create classes of no more than nine and no less than three students at a time. All necessary training materials are provided. Classes are usually conducted in one day, and after completion of a written exam, students are certified through the AHA. After all paperwork is returned to NEIEP, certification cards are sent out electronically to the student’s email, along with login information for the AHA website. This allows students instant access to both their credentials and lifesaving information from the AHA.

Instruction Hours:8

CE031 Forklift Certification Course

Benefit-eligible members should take advantage of NEIEP’s certification offering on the safe operation of the forklifts commonly found on work sites.
Identifies hazards associated with the use of a forklift, key points from code standards, and site-specific rules and procedures for operating a forklift safely. Students will complete an assessment of safe forklift operation knowledge with a score of 80% or higher, and they will be able to state the procedure for becoming qualified to safely operate another forklift with different controls, fuel systems, and attachments.

Instruction Hours:8

CE032 Aerial Lift Certification Course

After completing the Aerial Work Platform Safe Operation Training Program, participants will be able to identify hazards associated with the operation of an aerial work platform. They will be able to identify key code-related points as well as procedures for operating an aerial work platform safely. Students will complete an assessment of knowledge covering aerial work platforms with a score of 80% or higher, and they will be able to state the procedure for becoming qualified to operate another aerial work platform with different controls, fuel systems, configurations, and attachments.

Instruction Hours:8

CE033 Introduction to Automated People Movers (APMs)

Discusses APM systems in use today, with a specific emphasis on systems installed at airports. Describes the history of APMs, covering origins.

Instruction Hours:8

CE035 Virtual Code Courses

2013 Hydro Code Course
Provides a unique virtual experience for exploring hydraulic elevators with a focus on the code requirements that govern them. Students are placed in a virtual representation of the work environment where they will maneuver to all parts of the equipment. Covers the ASME A17.1 2013 code for traditional hydraulic elevators, with code references regarding hydraulic elevator pits, hoistways, machine rooms, and cabs.
Instruction hours: 10

2013 Escalator Code Course
Provides a unique virtual experience for exploring escalators with a focus on the code requirements that govern them. Students are placed in a virtual representation of the work environment where they will maneuver to all parts of the equipment. Covers the ASME A17.1 2013 Code for Escalators as well as ASME A17.2-2014 Guide for Inspection of Escalators.
Instruction hours: 8

2013 Traction Code Course
Provides a unique virtual experience for exploring overhead geared, overhead gearless, basement geared and machine room-less traction elevators with a focus on the code requirements that govern them. Covers the most relevant aspects of ASME A17.1-2013 Safety Code for Elevators and Escalators for overhead, basement, and MRL installations as well as A17.2-2014 Guide for Inspection of Elevators, Escalators, and Moving Walks. Students enrolling in the online course will find themselves in a virtual representation of the work environment where they can maneuver to all parts of the equipment.
Instruction hours: 8

Instruction Hours:26

CE036 Confined Spaces Awareness

Confined spaces can pose dangers in the work environment for Elevator Constructors, including entrapment, ventilation issues, or accidents involving electrical or mechanical equipment. This course provides an overview of the new Confined Spaces in Construction standard, 29 CFR 1926. This new ruling is compared to the older Confined Spaces in General Industry Standard, 29 CFR 1910. After successfully completing the course, students will have a greater awareness of safe work practices for confined spaces.

Instruction Hours:6

CE037 Motor Alignment Lab

Competent motor alignment is a valuable skill not to be overlooked by Elevator Constructors. Motor alignment, or tramming, is the operation of bringing the shaft centerlines of the motor and machine into alignment. The Motor Alignment Lab ensures that this important work does not fall away from the skillset of IUEC members. Covers three types of motor misalignment:

Angular misalignment occurs when the motor is set at an angleto the driven equipment.

Parallel misalignment occurs when the two shaft centerlines are parallel but not in the same plane.

Combination misalignment occurs when the motor shaft suffers from angular as well as parallel misalignment. Course participants will have the opportunity to explore methods, tips, and techniques to remedy these tramming troubles with the use of a specially designed lab that simulates the real-world experience.

After completing the course, students will be able to:

  1. Assess job scenario and perform proper pre-alignment procedures
  2. Demonstrate three different methods for motor alignment—“Rim and Face,” “Feeler Gauge,” and “Dual Drum”—to manufacturer specs
  3. Demonstrate pulley alignments to manufacturer specs using the straight edge technique
  4. Perform belt tensioning to meet manufacturer specs

Available in Spanish.

Instruction Hours:12

CE038 AC Motor Starters

Covers multiple ways to connect and start an AC motor, including across-the-line and Wye-Delta configurations. Explores how to construct reversing circuits and how to perform a mod to replace Wye-Delta with a soft starter. Describes troubleshooting methods for all of the circuits.

Available in Spanish.

Instruction Hours:20
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400 (Available in Spanish)

CE039 AC Motor Lab

Explores the proper connections of all AC motor types, from three-lead to twelve-lead. Discusses motor theory and the testing of motors that may have faults such as open or shorted windings.

Instruction Hours:16
Prerequisites:
Electrical Fundamentals 300
Electrical Theory & Application 400

CE040 Drug and Alcohol Awareness in the Workplace

Focuses on the safety hazards that substance abuse can create on a job site. Offers examples and resources for members who might want to support someone who struggles with a substance abuse issue.
For more information on benefits and support, visit the IUEC’s Member Assistance Program.

Instruction Hours:2

CE041 Multimeter Course

Details safe and proper handling of a multimeter to produce accurate, useful measurements.
Comprised of six lessons with 26 specific learning objectives covering the following topics:

Lesson 1. Multimeter Orientation
Lesson 2. Around the Dial
Lesson 3. Advanced Measurement Modes
Lesson 4. Extending Capabilities
Lesson 5. Choosing a Multimeter
Lesson 6. Inspection and Maintenance

Culminates with a final exam and provides a certificate upon successful completion with an exam score of 80% or higher.

Instruction Hours:3

CE042 Virtual Governor Lab

Simulates governor testing procedures in a virtual environment. Focuses on Category 1, Category 5, and Acceptance testing procedures as outlined by ASME A17.1, and simulates tripping speed, pull-through, and force to activate tests.
Designed by IUEC subject matter experts to function exactly as it would in the field. Provides familiarity with special tools, interpreting ASME A17.1 charts, and governor testing procedures.

Instruction Hours:2

CE043 Virtual Hydraulic Controller Theory and Troubleshooting

Reviews troubleshooting methods using the Virtual Hydraulic Controller Lab (VHCL). Includes numerous fault scenarios, each representing a separate trouble call that requires demonstration of a logical procedure for finding the fault.

Instruction Hours:15

CE044 Freight Door Maintenance and Repair

Examines details of freight door systems. Discusses maintenance procedures and repairs for landing doors and car doors, power and manual doors, interlocks, chains and linkages, lubrication, retiring cams, door operators and controllers. Explores freight door troubleshooting, including a chart that details possible solutions to different problems.

Instruction Hours:8

CE045 Escalator Step Index Training

Provides a template for performing periodic step index testing. Explores the differences in equipment type and installations that may require a need to alter the test procedure. Details guidelines that ensure proper testing and that may reduce injuries and equipment damage.

Instruction Hours:6

OS001/OS001G OSHA 10

CONSTRUCTION • GENERAL INDUSTRY
The 10-hour OSHA course provides basic awareness training on the recognition, avoidance, abatement, and prevention of workplace hazards. Successful completion provides the OSHA 10 certificate.

Instruction Hours:10

OS002/OS002G OSHA 30

CONSTRUCTION • GENERAL INDUSTRY
The 30-hour OSHA course provides training on an expanded list of safety topics associated with workplace hazards, including the recognition, avoidance, abatement, and prevention of workplace hazards. Also provides overview information regarding OSHA, including workers’ rights, employer responsibilities, and how to file a complaint. Successful completion provides the OSHA 30 certificate.

Instruction Hours:30

Current members need to log in to attend classes.